Descargar Imprimir esta página

Denon AVR-X1200W Manual Del Usuario página 226

Ocultar thumbs Ver también para AVR-X1200W:

Publicidad

Contents
Connections
o No video is shown on the TV
Symptom
No picture appears.
0
0
0
0
0
0
0
0
0
0
0
No video is shown on the
0
TV with the DVI-D
connection.
While the menu is being
0
displayed, no video is
shown on the TV.
Front panel
Display
Playback
Check the connections for all devices.
Insert connection cables all the way in.
Check that input connectors and output connectors are not reversely connected.
Check cables for damage.
Match the input settings to the input connector of the TV connected to this unit.
Check that the proper input source is selected.
Check the video input connector setting.
Check that the resolution of the player corresponds to that of the TV.
Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
compatible with HDCP, video will not be output correctly.
To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with
HDCP 2.2 only.
Use an "High Speed HDMI cable with Ethernet" or "High speed cable" that comes with the HDMI logo if
you wish to playback 4K (60/50 Hz) video.
With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
The video being played will not appear in the background of the menu when the menu is operated during
playback of the following video signals.
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- Some images of 4K video content
Rear panel
Settings
Cause / Solution
226
Remote
Tips
Appendix
Page
Index
48
171
64
171
213
238
238

Publicidad

loading