Descargar Imprimir esta página

Denon AVR-X1200W Manual Del Usuario página 246

Ocultar thumbs Ver también para AVR-X1200W:

Publicidad

Contents
Connections
Playback
Settings
Tips
Appendix
z1 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played.
z2 This item can be selected when a Dolby TrueHD, Dolby Digital or DTS signal is played.
z3 This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input.
z4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z5 During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z6 This setting is available when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 195)
z7 This item cannot be set when "Dynamic EQ" is set to "On". (v p. 159)
z8 This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z9 This item cannot be set when "MultEQ
XT" is set to "Off". (v p. 159)
®
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
246
Front panel
Display
Rear panel
Remote
Index

Publicidad

loading