Publicidad
A
B
C
D
A
B
C
• Remove the pan supports.
• Remove the burner lids (A) and burner
sprayers (B) from the burners (C).
• Remove the nozzle (D) and replace it with an
appropriate nozzle for the new type of gas
(see section "General nozzle table").
• Replace the gas label with the new label that
was supplied with the nozzle set.
• Place each burner sprayer (B) on the burner
(C).
• Position the relevant burner cap (A) exactly on
top of the cup.
• Refit the pan supports.
EN-14
Publicidad
