Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL ASSEMBLY INSTRUCTIONS
7. Remove one of the four preassemble screws
inside the housing assembly (G). Slightly
loosen the remaining three screws. Assemble
the light plate assembly (H) to the hosing
assembly (G) using the three key slots.
Replace the fourth screw and secure all four
screws.
8. Install bulbs (J).
9. Remove rubber washer and finial nut from post
on light plate assembly (H). Position lampshade
(I) onto light plate assembly (H) post and secure
with rubber washer and finial nut. Do not
overtighten.
7
G
H
8
9
13
J
Lowes.com/allenandroth
I
Publicidad
