Descargar Imprimir esta página

allen+roth LP8130LBN Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

HARDWARE CONTENTS (shown actual size)
AA
BB
Washer-Head
Screw
Screw
Qty. 9
Qty. 13
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Before you begin installing the fan, disconnect the power by removing fuses or turning off circuit
breakers.
• Make sure all electrical connections comply with local codes, ordinances, or the National Electrical
code. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are unfamiliar
with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades
to the floor and at least 30 in. from the ends of the blades to any obstruction.
• If you are mounting the fan to a ceiling outlet box, use a METAL octagonal outlet box.
Secure the box directly to the building structure. The outlet box and its support must be able to
support the moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.
• After you install the fan, make sure all connections are secure to prevent the fan from falling.
• For supply connections, if the conductor of a fan is identified as a grounded conductor, then it
should be connected to a grounded conductor power supply. If the conductor of a fan is identified
as an ungrounded conductor, then it should be connected to an ungrounded conductor power
supply. If the conductor of a fan is identified for equipment grounding, then it should be connected
to an equipment-grounding conductor.
•The net weight of this fan is: 26.01 lbs.
CC
DD
Fiber
Washer
Wire
Connector
Qty. 13
Qty. 4
4
EE
FF
Fan Chain
Light Kit Chain
Coupler
Coupler
Qty. 1
Qty. 1
Lowes.com/allenandroth
GG
Balance
Kit
(not shown
to size)
Qty. 1

Publicidad

loading

Este manual también es adecuado para:

0199985