TFA_No. 38.2024_Anleitung
Digital timer
• Press M1 button to recall the preset time.
• Push the MIN and SEC button at the same time to reset the timer.
• Set the time for M2 and M3 in the same way.
7.3 Stopwatch
• Push the MIN and SEC button at the same time to reset the timer.
• Push the S/S button to start the count up-process. ▲ appears in the
display.
• Use the S/S button to stop and restart the counting.
7.4 Setting of alarm sound
• With the switch at the right side set the volume for the alarm.
Hi: high
Lo: low
Mute
• The marking in the middle of the switch shows the selected volume.
26
03.07.2011
11:59 Uhr
Seite 14
Digital timer
7.5 Fixing
• With the foldable leg the instrument can be placed onto flat surfaces.
• With the foldable suspension device you can fix the instrument with
a nail at the wall.
• Use the two magnets at the back of the instrument for placement on
metal surfaces.
8. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring
agents. Protect from moisture.
• Remove the batteries if you do not use the product for a lengthy period.
• Keep the instrument in a dry place.
8.1 Battery replacement
• Replace the batteries when the display starts to fade.
27