Publicidad
8. Operating Instructions
•
Be aware of the Safety Instructions! (chapter 3)
•
Always switch OFF the device when it is not in use.
Determining the direction of rotation
1.
Connect the banana plug of the test cables to the input sockets of the
device. Note the colors or the encoding (L1, L2, L3) of the plugs!
2.
Plug the test probes into the other ends of the test cables.
3.
Switch the unit on with the main switch (1).
4.
Touch the three phases with the test probes.
5.
Either the green LED "R" (4) or the red LED "L" (5) lights up. This shows the
direction of rotation of the field. (R = right / clockwise, L = left /
counterclockwise)
Attention!
The rotary indicator lights up even if the neutral conductor N is connected
instead of a phase.
If different displays are displayed, please refer to the table "The LEDs and
their meaning" (chapter 5)
10
English
Publicidad
