Descargar Imprimir esta página

GreenWorks Pro STB409 Manual Del Operador página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Line is automatically released and the cut-off blade cuts
the excess length.
9.4
ADJUST THE CUTTING
DIAMETER
The machine is set at a 14 in. (35.6 cm) cutting diameter.
You can adjust to a 16 in. (40.6 cm) cutting diameter.
Set the cutting diameter to 14 in. (35.6 cm) for greater
runtime and 16 in. (40.6 cm)for a larger cutting area.
1. Remove the battery pack.
2. Remove the blade screws from the cut-off blade (17).
3. Turn the cut-off blade 180°.
4. Tighten the blade screws.
9.5
LINE CUT-OFF BLADE
This trimmer is equipped with a line cut-off blade (17) on the
guard. The line cut off blade continuously trims the line to
ensure a consistent and efficient cut diameter. Advance line
whenever you hear the motor running faster than normal, or
when trimming efficiency diminishes. This will maintain best
performance and keep line long enough to advance properly.
NOTE
17
English
9.6
ATTACH MACHINE TO
SHOULDER STRAP
1. Attach the carabiner to the carrying ring on the drive
tube.
2. Put on the shoulder strap.
3. Adjust the length of the strap so that the carabiner is
about a hand's width below your right hip.
9.7
OPERATION TIPS
Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
Do these tips when you use the machine
Keep a firm hold with the two hands on the machine
while the string head is spinning.
Cut tall grass from the top down.
If grass winds around the trimmer head:
9
WARNING
WARNING
EN

Publicidad

loading