MAINTENANCE AND CHEMICALS
Always unplug this product from the electrical outlet before removing, cleaning, servicing or
making any adjustment to the product.
Water Sanitation
The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if
necessary). Adding sanitizer and other chemical will control bacteria and viruses present in the spa water.
The maintenance of a proper water balance through appropriate use of sanitizers is the single most important
factor in maximizing the life and appearance of the spa tub as well as ensuring clean, healthy and safe water.
Proper technique is important for water testing and treating the spa water. See your pool/spa professional for
chemical, sanitizer, test kits and testing procedures questions.
CATUTION: ALWAYS FOLLOW THE CHEMICAL MANUFACTURER'S DIRECTIONS, AND THE
HEALTH AND HAZARD WARNINGS.
Do not add chemicals if the spa is occupied. This can cause skin or eye irritation. Concentrated chlorine
solutions can damage the spa tub. In no event is Intex Recreation Corp., Intex Development Co. Ltd., their
related companies, authorized agents and service centers, retailers or employees liable to the buyer or any other
party for costs associated with the loss of spa water, chemicals or water damage.
Maintenance of Spa Water and Cartridge
Protect all the spa occupants from possible water-related illnesses by keeping the spa water clean and sanitized.
Always practice good hygiene. To ensure proper spa water quality follow these procedures:
Inspect and clean the fi lter cartridge every day, and change the fi lter
1.
cartridge every 3 days.
Unscrew the cartridge housing assembly from the spa tub wall and
a.
remove the cartridge (see drawing 13).
Use a garden hose to rinse off the cartridge. If the cartridge remains
b.
soiled and discolored it should be replaced. Keep spare cartridges
on hand.
Reinstall the clean cartridge back into the cartridge housing and
c.
replace the cartridge housing assembly back onto the spa tub wall.
Change the spa water every 3 days. See "Spa Tub Drainage" and "Spa
2.
Tub Cleaning" sections for details.
Use spa chemicals to maintain proper water chemistry. Spa damage
3.
resulting from misuse of chemicals and mismanagement of spa water
is not covered by the warranty.
All occupants must shower before entering the spa.
4.
Water Chemistry Balance
Maintain the spa water pH level between 7.2 and 7.8, total alkalinity level between 80 and 120 ppm and free
chlorine level between 2 to 4 ppm. Use the included test strips to test the spa water chemistry before each use
of the spa and continue to test the water no less than once a week.
The Test Strips can test the "Free Chlorine", "pH", "Total Alkalinity" and "Calcium Hardness" levels at the same
time:
Dip the entire strip into the water and remove immediately.
1.
Hold the strip level for 15 seconds. Do not shake excess water from the strip.
2.
Compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level
3.
in the pool water.
NOTE: Check the expiry date of the test kit as the test results may be inaccurate if the kit is used after that date.
Low pH will damage the spa tub and pump. Damage resulting from chemical imbalance is not covered by the
warranty.
Use the included chemical fl oater dispenser to administer chlorine [chemical tablet size: less than 1" (2.5 cm)
diameter] into the spa water. Add 1 tablet into the dispenser. Always follow the chemical manufacturer's
directions. Remove the chemical fl oater dispenser when the spa is in use.
Never let chlorine come in contact with the spa tub if it is not completely dissolved.
IMPORTANT: Press the
the chemicals into the water.
Never mix chemicals together. Add the chemicals to the spa water separately. Thoroughly dissolve each
chemical before adding another one to the water.
S AVE THESE INSTRUCTIONS
WARNING
button on the spa control panel to turn on the bubble air blower and help dissolve
(295IO) SPA ENGLISH 7.5" X 10.3" PANTONE 295U 08/20/2016
295
English
A
13
12
13
14
Page 14