Publicidad
Idiomas disponibles
Idiomas disponibles
5. Carefully remove the board
without moving the posts,
screw and tighten the
posts in position.
6. Place the Bath Bench
back in tub. All four posts
should contact the tub.
Adjust if needed to ensure
a snug fit.
Using Bath Bench
1. Ensure you read cautions
section before using the
Bath Bench.
2. It is designed for a user
to sit on while inside the
bath, enabling them to
bath, wash or shower in
comfort. It has a weight
limit of 250 lb (113 kg).
3. Consult your healthcare
professional for advice
about using the product
safely and transferring to
and from the bath.
Cleaning Bath Bench
To maintain appearance and
promote good hygiene, clean
periodically with mild soap
and rinse with warm water.
Wipe dry after each use.
1. For more thorough
cleaning, remove Bath
Bench from tub and
separate all parts prior to
cleaning.
Figure 3
Figure 4
Figure 5
Figure 6
PIC-00303 G2-400RX1
REVISED: 01/14/21
Publicidad
