TECHNICAL DATA
TECHNICAL
INFORMATION
Wavelength Range
Irradiance
Charger
Handpiece
Operating Conditions
Transport and
Storage Conditions
10
PINKWAVE™ CORDLESS LED CURING LIGHT
PinkWave™ optical power falls between 375-900nm (see graph below).
Standard: > 1515 mW/cm
, Ramp: > 1515 mW/cm
2
Input: 100-240 VAC, 50-60 Hz
Manufacturer: Inter-Med, Inc.
Dimensions without adapter (DxH):
87mm x 58mm
Classification: Protection class II,
Battery: 3.7 V nominal, 950mAh Li-ion
Battery Pack Manufacturer: HIBATT
Dimensions (LxD): 230mm x 20mm
Classification: Type BF,
Intermittent Operation: The device has been designed solely for short-term operation.
Typical operating time at room temperature (23°C): 3-20 sec (depending on mode) per layer
of composite.
Operating Time: Approximately 60 20-second cures.
Time to Charge Empty Battery Pack: Approximately 3 hours
Temperature: 10°C - 40°C (59°F - 104°F)
40
C
°
10
C
°
Temperature: -20°C − 40°C (-4°F − 104° F)
Relative Humidity:
30% - 90% (non condensing)
90% (max)
30%
, Boost: > 1720 mW/cm
2
Nominal Consumption: 6W max
Model: PinkWave™
Mass: 175g
Battery Pack Model: IMR14650
Mass: 88g
Atmospheric Pressure: 697hPa - 1013hPa
697 hPa
40
C
°
-20
C
°
Atmospheric Pressure:
500hPa - 1400hPa
500 hPa
,
2
1013 hPa
1400 hPa