InterMed pinkwave VISTA APEX Manual De Instrucciones página 5

Attaching/Detaching the Battery Pack to the Handpiece
1. Insert the battery pack into the handpiece. Allow the threads to catch onto each
other and then screw on clockwise.
2. When the battery pack and handpiece are correctly screwed in, the unit will beep
multiple times.
3. NOTE: The battery pack is threaded and can only be inserted into the handpiece in
one orientation! The battery pack should be easy to insert.
Attaching and Removing the Barrier Sleeve
1. Insert the head of the PinkWave™ Curing Light into the opening on the bottom of
the barrier sleeve.
2. Slide the barrier sleeve onto the PinkWave™ Curing Light to cover the entire device.
3. After use, peel off and dispose of the barrier sleeve.
NOTE: Only PinkWave™ Disposable Barrier Sleeves should be used on the
PinkWave™ Curing Light. Barrier sleeves are for single use only.
Using the Autoclavable Light Shields
1. Slide light shield over the barrier sleeve and head of PinkWave™.
2. Light shield opening should be facing the same way as the lens.
3. Light shield should be secured on the device and replicate the
image below.
NOTE: DO NOT operate PinkWave™ without the Autoclavable Light Shield,
and either the Vista Apex Protective Eyewear or PinkWave™ Paddle.
5