Publicidad
Idiomas disponibles
Idiomas disponibles
2. TECHNICAL SPECIFICATIONS
EN
Operating voltage
Energy consumption
Protection class
3. DESCRIPTION
1.
Air flow switch
2.
Air outlet
3.
Air inlet
4.
Air inlet grill
4. BEFORE FIRST USE
4.1. Unpacking
1.
Unpack all of the parts.
2.
Just after unpacking, check for completeness and any damage sustained during shipping.If
your package is damaged or incomplete, please contact our After-Sales department.
5. USE
5.1. Use
1.
Connect the plug (6) to a compatible mains supply.
2.
Use the concentrator (1) when you want to concentrate the power of the air flow on small
areas (like a curl or a wave) or when you want to soften curls.
3.
Turn on the appliance by moving the air flow switch (1) to position
4.
Always direct the air flow onto hair and not the scalp.
5.
To avoid over-drying, do not concentrate the heat on one area for an extended period. Move
the hairdryer continuously while styling your hair.
6.
To turn the appliance off, move the airflow switch (1) to 0.
7.
Always set the air flow switch to 0 and unplug the appliance after use.
Warning ! The concentrator (7) become very hot when in use!
Warning ! If it overheats, the appliance turns itself off automatically. Unplug the
appliance from the power source, then let it cool down completely. Before using the
appliance again, check that the air inlet or outlet openings are not blocked by lint, hair
or other objects.
6. CLEANING AND MAINTENANCE
Warning ! Before cleaning, make sure you have the appliance switched off. Always
remove the plug (6) from the socket and leave the appliance to cool down before
cleaning it.
Warning ! Never submerge the electrical parts in water or any other liquid during
cleaning or when it is operating. Never expose the electrical parts to running water.
220-240 V~, 50-60 Hz
1300 W
Classe lI
5.
Hanging loop
6.
Power cord and plug
7.
Air concentrator
8
or
:
Publicidad
