Publicidad
Idiomas disponibles
Idiomas disponibles
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or
return a product. Refer to
What is Included
•
4BAR LT QuadBT ILS
•
Power cable
•
Tripod
To Begin
Unpack the 4BAR LT QuadBT ILS and make sure all parts have been received in good condition. If the box or contents
appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type
and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting clamp (x2)
(such as CLP-15 from Chauvet)
L bracket (x2)
Control Panel Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
4BAR LT QuadBT ILS QRG Rev. 1
QUICK REFERENCE GUIDE
Contact Us
at the end of this QRG for contact information.
•
Carrying bag
•
Footswitch
Safety
Notes.
Safety cable
Clamp hanging
(such as CH-05
from Chauvet)
Tripod
mounting point
•
L brackets
•
Quick Reference Guide
bolt (x2)
Pod pan
adjustment
adjustment knob
knob (x4)
EN
Pod tilt
(x2 per pod)
2
Publicidad
