Publicidad
Idiomas disponibles
Idiomas disponibles
Grill Controller guide
CONTROL DIAL
Turn this control dial to adjust the values for the
timer,
meat
temperature. Push the control dial to confirm new
targeted value. The grill temperature can be adjusted
in 25 ˚F (14 ˚C) increments. During cooking, push the
knob to display the current grill set temperature.
POWER
Press to turn on the controller. When finished
cooking, press again to shut down the grill.
MODE
Used in conjunction with other buttons for igniting or
changing cooking modes. Also used to cycle
between heat settings when no target temperature is
set. Detailed operating instructions can be found in
the following pages.
Zone A (Left)
Press to select the left burner when igniting or
setting the cooking mode for that burner.
Zone b (right)
Press to select the right burner when igniting or
setting the cooking mode for that burner.
Detailed operating instructions can be found in the following pages.
32
probe
temperature,
and
PROBES
P1-P4
This grill can operate up to four temperature probes
to help you cook a variety of foods to perfection.
grill
Press to cycle through each probe connected.
TIMER
Press to set a timer. The controller will alert once the
time has expired. Press and hold the button for 3
seconds to cancel the timer.
Self Clean
The NEEVO digital grill includes a convenient self-
cleaning setting to burn off food residue at a high
temperature after your cookout.
°F/°C
Temperature scale
Press and hold CONTROL DIAL for three seconds to
change the temperature scale.
Warm mode
Press MODE, while burner(s) are on to switch to a
pre-set warming temperature. To confirm, press
CONTROL DIAL and
will remain on.
Publicidad
