Care and Maintenance
Warning
Inspect the burner assembly properly prior to operating your grill. Improperly assembled burners
can result in fire or injury. Only replace the burners with authorized Nexgrill replacement parts.
GRILL BURNERS
Extreme care should be taken when moving a burner as it must be correctly centered on the orifice before any attempt
is made to light the grill. Frequency of cleaning will depend on how often you use the grill.
DO NOT SPRAY THE GRILL WITH A GARDEN HOSE OR POWER WASHER TO PREVENT DAMAGE
TO ELECTRICAL COMPONENTS.
MAIN BURNER CLEANING
Ensure the gas valve is in the closed position and the grill is turned off. Make sure the grill is cool. Clean the exterior of
the burner with a wire brush. Clear stubborn scale with a metal scraper. Clear any clogged ports with a straightened
paper clip. Never use a wooden toothpick as it may break off and clog the port. Check the inside of the tube for
insects, spider webs, or other obstructions at least once a month. Clean them out, if present.
HOW TO REPLACE MAIN BURNER
Step 1. Remove the main burner "R" pins on the
back wall of fire box by using needle nose pliers.
Step 2. Use a screwdriver to remove the igniter pin
and thermocouple screws, then remove the burner
from the front wall of fire box.
Step 3. After cleaning, reinsert the burner ensuring
that the opening is over the orifice.
Step 4. Reinstall the screws onto the igniter pin and
thermocouple.
Step 5. Secure the main burner on the back wall of
fire box with "R" pins.
38
:
1
3
5
2
4