Rointe RAVEL AQUA WIDTH 500 WHITE Manual De Instalacion Y Uso página 9

The product must not be placed in front of or directly below a fixed socket. The lower part
must be at least 15 cm above the floor.
An installation kit is included in the packaging. Follow the instructions below:
1. Select the right place on the wall.
2. Place the mounting template on the wall, making small marks where the holes are to be
located.
3. Remove the mounting template and drill holes in the wall.
4. Insert the plugs into the holes made.
5. Screw the plastic anchoring piece to the wall with the screw Ø 5.5 x 50 mm.
6. Screw the two towel rail fastening pieces and the plastic fastening piece to the
horizontal tube of the towel rail as shown in Figure 1 with the screw Ø 6 x 35 mm.
7. Insert the assembly into the plastic anchoring piece. Secure with the Ø 2.9 x 9.5 mm
grub screw.
8. Fit the trim on the cable clamp.
Nº.
1 Plug Ø 10 x 45 mm
2 Fixed plastic support
3 Screw Ø 5.5 x 50 mm
4 Plastic bracket with nut M6
5 Plastic head support
6 Screw Ø 6 x 35 mm
7 Plastic trim
8 Locking screw Ø 2.9 x 9.5 mm
9 Product
4. MAINTENANCE AND CLEANING
The product does not require any maintenance. We recommend cleaning the product (back,
bottom of the product, etc.). Do not use abrasive substances on the product, clean it with
a damp cloth and neutral pH soap and the screen with a dry cloth. Before carrying out any
cleaning operation, make sure that the product is switched off and at room temperature.
ITEM
RAVEL AQUA HYDRAULIC TOWEL RAIL
EN
9