Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Installing the sprayer support
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Insert the sprayer support (D) through the far
right hole on the sink.
□
Screw the sprayer mounting nut (E) onto the
sprayer support (D) shank from underneath
the sink, and hand tighten.
D
E
2
Installing the faucet assembly
□
Place the faucet assembly (A) in position on the
sink.
□
Insert the side sprayer (C) hose down through
the sprayer support (D) and sink. Align the
tabs (1 & 2) on the quick connects (3). Push the
quick connector housing rmly upward and
snap it onto the receiving tube tab. Pull down
moderately to ensure the connection has been
made.
□
If it is necessary to remove the quick connector,
squeeze the tabs on the hose, and pull down to
disconnect.
1
3
2
5
Please contact 1-855-HD-GLACIER for further assistance.
A
C
D
HOMEDEPOT.COM
Publicidad
