Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3
Tightening the faucet assembly
□
Secure the faucet assembly (A) to the sink
using the mounting nuts (B) provided. Hand
tighten only.
B
Operation
1
Flushing and checking for leaks
IMPORTANT: After installation is complete, remove the
aerator to ush the water lines.
□
Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. This ushes away any debris that could
cause damage to internal parts.
□
While the water is running, check for leaks.
□
Turn off the water and replace the aerator.
A
6
4
Making the waterline
connections
□
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
□
Use wrenches to tighten the connections. Do not
overtighten.
1
3
2
Publicidad
