Publicidad
Idiomas disponibles
Idiomas disponibles
LISTENING TO AN AUX (AUXILLARY) DEVICE
Plug a sound source into the AUX jack of the clock using a 3.5 mm
1.
audio cable (not included). This can be an MP3 player, phone or
other device that has a 3.5mm headphone or line output.
Press the SOURCE button repeatedly until the LED display reads
2.
"AUX".
3.
Start playing music on your aux device and adjust the volume on
the aux device as needed. Adjust the volume of the clock speakers at
any time by pressing the VOL + and VOL - buttons.
AUTO POWER-OFF (SLEEP TIMER)
From AM/FM or AUX mode, press the SNOOZE/SLEEP button. "90" will
blink on the display, meaning that the clock will go into standby mode
in 90 minutes. Keep pressing SNOOZE/SLEEP to select 80, 70, 60, 50
minutes, etc. After the selected number of minutes has been blinking
for 5 seconds, it will be set as the selection for auto power-off.
Until the clock powers off, you can press SNOOZE/SLEEP again to see
how much time is left, to adjust the power-off time again, or to disable
auto-power off.
To turn the clock off immediately. You can always just press the
SOURCE button until the clock goes into standby mode. In standby
mode, no audio will be playing but the clock and its alarms are still
functional.
OTHER FUNCTIONS
Press the Dimmer button select the brightness of the clock display
•
there are two brightness levels.
Press the TIME button to check the current time and date from any
•
mode
.
–9–
Publicidad
