Publicidad
Idiomas disponibles
Idiomas disponibles
7
Operation
7.1
Authorisation
u Authorise (dependent on the configuration).
The following authorisation options are available:
No authorisation (Autostart)
All users can charge.
Authorisation through RFID
Users whose RFID card has been entered in the
whitelist can charge.
u Hold the RFID card in front of the RFID card
reader.
If the vehicle is not connected to the
product within 5 minutes, the authorisation
is reset and the product switches to
Standby mode. The authorisation process
must be repeated.
7.2
Charging the vehicle
WARNING
Risk of injury from using unsuitable aids
If unsuitable aids (e.g. adapter plugs, extension
cables) are used during the charging process, there
is a risk of electric shock or cable fire.
u Use only the charging cable intended for the
vehicle and the product.
Requirement(s):
ü The authorisation process is complete (if neces-
sary).
ü The vehicle and the charging cable are suitable
for Mode 3 charging.
u Unroll the charging cable completely.
u Connect the charging cable to the vehicle.
Selecting the charging mode
1 "3.5 Solar charging modes" [} 8]
34
2
Fig. 17: Sun button
Press the Sun button (1) to select the charging
mode according to the following diagram.
Standard
Mode
Fig. 18: Switching the charging modes
The set charging mode is indicated by the "Sun" (2)
LED:
Status of "Sun" LED
Off (is not lit)
Lights up
Pulsates
1
Sunshine
Sunshine+
Mode
Mode
Set charging mode
Standard mode
Sunshine mode
Sunshine+ mode
Publicidad
