Publicidad
attention
Read and follow all safety instructions and keep this manual for later
EN
reference.
Safety instructions
1.
Read and follow all instructions that are on the product or provided with the product.
2.
Save these instructions.
3.
Unplug the product when leaving the house.
4.
This is an electric product — not a toy! To avoid the risk of fire, burns, personal injury, and
electric shock it should not be played with or placed where small children can reach it.
5.
The product is intended for indoor use only, do not use in outdoor areas.
6.
Avoid the use of the product in wet or damp environments.
7.
Do not use this product for other than its intended use.
8.
Do not cover the product with cloth, paper, or any material not part of the product when
in use.
9.
Do not limit the flow of air around the product to avoid heat accumulation.
10.
Avoid the use in very hot environments (close to radiators, ovens, ...)
11.
Do not close doors or windows on the product or extension cords as this may damage the
wire insulation.
12.
Do not connect with 3rd party connections, devices not approved by Twinkly
13.
Do not use it in countries other than that in which the product was designed for.
14.
Do not use it in places where there is a risk of electric shock.
15.
The product is not designed for use in emergency exits or emergency lights.
16.
Do not connect the product to the power supply while it is in the packing.
17.
Where breakage or damage occurs the device must not be used/energised but disposed
of safely.
18.
The lamps are not replaceable.
19.
WARNING – RISK OF ELECTRIC SHOCK IF LAMPS ARE BROKEN OR MISSING. DO NOT USE.
Use and care instructions
• Each master panel can only connect up to 15 panels
• This device supports the USB PD (Power Delivery) protocol. It allows using power adapters
from other vendors to power the device. For any configuration that connects more than one
light panel (e.g. 1master panel with 1 extension panel), a USB-C power delivery capable pow-
er adapter providing at least 20V and 3A (60W) is required. We recommend purchasing our
power adapter if needed.
• Before using or reusing, inspect the product carefully.
• When storing the product, carefully remove the product from wherever it is placed, to avoid
any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
• Do not open the device, not to lose the warranty.
• Do not modify the device, not to invalidate the certification.
• Do not place metallic/conductive objects near the exposed contacts of the product
• Do not allow children to use the product with no supervision
• Do not clean the device when it is connected to power.
• Do not use cleaning agents, only a soft dry cloth
• Use only the original connectors to link the panels together
• Do not bend the panels with the connector still attached.
• Hanging carefully when putting panels on the wall.
• Do not attach the panels to the floor so as not to risk stumbling.
• Avoid exposing the product to water.
• Do not place it in the water.
• For all configurations other than the single master starter kit, we recommend using Twinkly
power supply.
/
/
a t t e n t i o n
a t t e n z i o n e
a t t e n t i o n
/
/
/
f ø l g e n d e
a t h u g i ð
p o z o r
u p o z o r n e n i e
Interference
This device is designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/television technician for help.
WARNING!
Do not connect the light panel to the power supply while it is in the packaging. THE LAMPS ARE
NOT REPLACEABLE. Do not connect this to devices from other manufacturers. Keep out of reach
of young children.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately
from household waste. The item should be handed in for recycling in accordance with local
environmental regulations for waste disposal.
The manufacturer, Ledworks Srl, declares that this device complies with the (LVD) 2014/35/EU,
(RED) 2014/53/EU, (EMC) 2014/30/EU, (RoHS) 2011/65/EU, (REACH) 1907/2006 directives. The
full text of the EU declaration of conformity is available at the following Internet address: www.
twinkly.com/certifications
System Requirement
The minimum system requirement for mobile phones are iOS 12 and Android 6 Check the app
store for the latest update to ensure the best performance. To control this HomeKit-enabled
accessory, the latest version of iOS or iPadOS is recommended.
Technical Specifications
IP protection: IP20
Operating RF for Wi-Fi / Bluetooth
Frequency
Max output Power
Leggere e seguire tutte le istruzioni di sicurezza e conservare questo
IT
manuale per riferimenti futuri.
Istruzioni di sicurezza
Leggere e seguire tutte le istruzioni presenti sul prodotto o fornite con il prodotto.
1.
Salva queste istruzioni.
2.
3.
Scollegare il prodotto quando si esce di casa.
Questo è un prodotto elettrico, non un giocattolo! Per evitare il rischio di incendi, ustioni,
4.
lesioni personali e scosse elettriche, non dovrebbe essere giocato o collocato dove i bambini
/
/
/
a c h t u n g
a t e n c i ó n
a a n d a c h t
/
/
/
p o z o r
f i g y e l e m
a t e n ţ i e
2402/2480 Mhz
<100mW
3
/
/
/
/
h u o m i o
b e m æ r k
o b s
m e r k
/
/ у
/
u w a g a
в а г а
b н и м а н и е
Publicidad
