Publicidad
Idiomas disponibles
Idiomas disponibles
Preparazione del caffè e delle bevande
SELECTOR (OPTIONAL for VAP Model)
For single coffee preparation (symbols 2-3) move
selector (15) to the left (Fig.7)
• Use capsules specifically intended for this machine.
• To prepare a good espresso or a beverage, when using
the machine for the first time in the day, remember to
preheat the cup with water from the machine without using
the capsule. This will give you the correct temperature for
dispensing the beverage.
• Place the cup under the dispensing spout.
• Lift the control lever (1) completely (Fig. 8) and insert a
capsule in the space provided. (Fig. 9)
ATTENTION:
Before inserting the capsule, slowly and completely lift the control
lever (1) located on the top of the machine to eject the old capsule. For
correct hygiene and to maintain high product quality it is advisable
to eject the capsule immediately after dispensing.
• Completely close the lever (1), press a dispensing button (2-3-4) depending on the according
to taste, and press it again to stop dispensing when the desired quantity of coffee or beverage
is reached (Fig. 10). In case of difficulty in closing the lever, completely open it and close it
again.
• To make a long coffee (Americano) press the delivery symbol (4)
• To extract the capsule, slowly lift the lever (1). If the capsule is not ejected, repeat the operation
or press the dispensing symbol (2-3-4) and lift the lever (1) at the same time.
ATTENTION:
• After the consecutive dispensing of 10 coffees or beverages, wait at least 2 minutes before
dispensing any more.
• The machine is designed to dispense single shots with a maximum duration of 75 seconds.
1
Fig. 8
Fig. 9
29
15
1
2
Fig. 10
Fig. 7
3
Publicidad
