Publicidad
Idiomas disponibles
Idiomas disponibles
RECORDING
From CD to SD/USB
The system can convert a complete CD into MP3 format and copy it to a USB mass storage device (or Flash Drive) or SD
card (not supplied).
It is also possible to copy a single MP3 track to USB/SD card or from USB /SD card to USB/SD card.
1. In CD playback mode, press REC/ERASE /
are detected), playback will stop and skip back to the beginning of the current track, the system will scan the contents
of the USB device/SD card and create a folder to store the MP3 track(s). Resume CD playback and start ripping from
that moment. The corresponding target device icon ― USB ‖ / ― CARD ― will start flashing on the display.
2. Press STOP/BAND /
MP3 Copying
1. In CD-MP3, USB or SD card playback mode, press REC/ERASE /
or USB to SD card or vice versa. Playback will stop and the system will scan the contents of the USB/SD card and
create a folder to store the MP3 track(s).
2. ―REC‖ will show on the display.
3. ―COPY 01‖ will show on the display, the proportional copied percentage will be shown on the decimal number.
4. The target device icon ―USB‖ or ―CARD‖ will start flashing, the decimal number will be increment from 01 as MP3 copying
starts; the process will stop when it has reached 100.
5. The current MP3 track will start playing back from the beginning.
Encoding/Recording from AUX to SD/USB
The system is capable to convert an audio signal from AUX input to MP3 format and store on a USB mass storage device or
SD card (the default is to USB if both devices are detected).
1.
Press FUNCTION /
2. Press REC/ERASE /
store MP3 tracks.
3. ―REC‖ and ―RIPP TO― are displayed, ― AUX ― will start flashing on the display.
4. The target device icon ― USB ― or ― CARD ― starts flashing as ripping begins.
5. Press STOP/BAND /
Notes:
The message ― NO FUNCT ― will be displayed if any key is pressed during the AUX ripping process.
·
The message ― NO DEV ― will be shown if neither USB or SD card not detected.
·
The message ― FULL ― will be displayed if not enough memory is left on the device.
·
to start ripping to USB/SD card (the default is to USB if both devices
to exit CD ripping.
once or repeatedly to select ‗AUX' mode.
to start ripping, the system will scan the contents of the USB / SD card and create a folder to
to exit AUX ripping.
to start MP3 copying from CD to USB/SD card,
Publicidad
