Publicidad
Idiomas disponibles
Idiomas disponibles
Notes:
1. The USB Port does not support connection with a USB extension cable.
2. This unit is not designed for communication with a computer directly.
3. It is not guaranteed that all USB memory devices and SD cards will work on this audio system.
4. The system supports USB devices/SD Cards of 512MB and up to 4GB Flash memory.
IMPORTANT:
Do not disconnect the USB device during USB mode, as this may damage the device or its files. Please power off first or press to
select another Mode before safely disconnecting the USB device.
USB Specification:
Interface
-
USB 2.0 Full speed, HOST (USB HUB is not supported) Corresponding Flash memory
-
Compatible with MPEG Audio 1, 2, 2.5
-
Compatible with Layer 1, 2, 3
Compatible with Bit rate: 128 – 320 Kbps
-
-
Subfolder nest : 8 levels
-
Number of track / titles max 999
-
Support ID3 tag V2.0
SUBWOOFER SOCKET
The subwoofer socket enables you to attach a subwoofer (not supplied) which will enhance bass response. Please contact your
retailer for suitable subwoofer models.
CD PLAYER
Playing a CD
1. Press FUNCTION /
2. Press CD OPEN / CLOSE /
3. Insert a disc with the printed side facing up. Press CD OPEN / CLOSE /
‗READ' is displayed as the CD player scans the contents of the disc.
4. Track no. 1 will play back automatically after scanning of the contents of the Compact Disc has finished.
5. Press FF/
or FB/
6. Press STOP/BAND /
Note: ―ESP‖ will flash on the display for 40 seconds and will then stop flashing.
CD-MP3 Disc Playback
1. Insert a CD-MP3 format disc. Press CD OPEN / CLOSE /
player scans the contents of the disc.
to set the unit to CD MODE.
to open the CD Drawer.
once or repeatedly until the desired track number appears on the display.
to stop playback.
again to close the drawer,
again to close the drawer. ‗READ' is displayed as the CD
Publicidad
