Jeep Hemlock Manual Del Usuario página 7

Before each use, carefully check that the brakes are working correctly and are not worn; check the tyre pressure, the wear
of the wheels and battery charge status.
Regularly check that the tightness of the various elements secured by bolts. The nuts and all the other self-tightening parts
can become loose so, these components need to be periodically checked and tightened.
Like all mechanical components, the item is subject to wear and tear. Different materials and components may react to
wear or stress fatigue in a variety of ways. If the useful life of a component is exceeded, it could break unexpectedly and
injure the user. Any cracks, scratches or changes in colour in areas subject to high levels of stress indicate that the life of the
component has been reached and must be replaced.
CAUTION
Permitted speed
The maximum allowed legal speed is 25km/h.
The control unit has been configured to prevent any change to the maximum speed permitted.
Any changes to the control unit which have not been authorised by the manufacturer will exclude the latter from any liability
related to injury caused to persons and/or damage to property, and will invalidate the bike's warranty terms and conditions.
DANGER
Risk of injury
Ride at a speed and behave in keeping with your ability; never use the electrically power assisted cycle over 25Km/h as this
could cause serious damage and injury to yourself or other people.
CAUTION
Place of use
• The electrically power assisted cycle can be used outdoors providing there are no adverse weather conditions (rain,
hail, snow, strong wind, etc.).
• Maximum permissible temperature: +40°C
• Minimum permissible temperature: +0°C
• Maximum permissible humidity: 80%
• The operating environment must be a flat, compact, smooth tarmacked surface, with no potholes or depressions and
free of obstacles and patches of oil.
• In addition, the operating environment must be illuminated, either by sunlight or artificial light, so as to ensure that the
path and the controls of the electrically power assisted cycle may be viewed correctly (300 to 500 lux recommended).
Misuse and precautions
• The actions described below, which clearly cannot cover the entire range of potential possibilities regarding 'misuse' of
the electrically power assisted cycle, are to be regarded as strictly prohibited.
DANGER
It is strictly prohibited to:
• Use the electrically power assisted cycle for uses other than the ones for which it was manufactured.
• Ride the electrically power assisted cycle if the rider's weight exceeds the permitted limit.
• Use the electrically power assisted cycle under the influence of alcohol or drugs.
• Use the electrically power assisted cycle in areas at a risk of fire, explosions or in places with a corrosive and/or
chemically active atmosphere.
• Use the electrically power assisted cycle in adverse weather conditions (heavy rain, hail, snow, strong wind, etc.).
• Use the electrically power assisted cycle in poorly lit areas.
• Ride across or stop on uneven or rough ground (bumpy roads with potholes, depressions, obstacles, etc.) to avoid the
risk of falls and injury to the rider and damage to the product.
• Charge the battery in an environment that is either too hot or insufficiently ventilated.
• Cover the battery while its charging.
06