HVAC control
On/Off. Pressing the icon turns the zone in which the thermostat is located on or off.
23.5°
Set-point temperature. Using the - and + signs that appear when you press on the
temperature, you can select the desired set-point temperature, in steps of 0.5°C.
The temperature range permitted in heating mode is: 15-30°C. In cooling mode: 18-30°C. These
vary depending on the level of efficiency (Eco-Adapt) that has been selected on the master
interface.
Efficiency indicator. Depending on the working temperature, the Blueface zero thermostat
displays a range of colors based on the system's level of efficiency:
Green: very efficient.
Eco-Adapt function
This sets your system's level of energy efficiency and adapts the temperatures to progressively
more efficient values, establishing limits according to the degree of energy savings selected:
Off. The temperature range is the range permitted by the system.
Manual. Sets the temperature limits in the zones according to those defined in the master
thermostat.
Spain | Portugal |
Germany
15°C - 22°C
24°C - 30°C
15°C - 21.5°C
25°C - 30°C
15°C - 21°C
26°C - 30°C
User settings
Select language/country
Change brightness
Information. This parameter offers information about:
•
Zone: firmware, zone, association, actuator or communications status.
•
System: firmware, settings and information on system and installation controllers.
•
Devices: indicates the elements connected to the system.
•
Webserver: settings, IP address and MAC.
•
Warnings.
Fan speed
The default setting is Automatic mode, imposing airflow based on the number of zones on
demand. Depending on the type of installation, it will be possible to select the speed manually
from the master thermostat.
High speed
Medium speed
Yellow: efficient.
Orange: inefficient.
France
15°C - 22°C
24°C - 30°C
15°C - 20.5°C
25°C - 30°C
15°C - 19°C
26°C - 30°C
Red: very inefficient.
Italy
15°C - 21°C
24°C - 30°C
15°C - 20.5°C
25°C - 30°C
15°C - 20°C
26°C - 30°C
Low speed
Automatic speed
EN
5