Publicidad
Idiomas disponibles
Idiomas disponibles
- Do not aim jets of water or inflammable liquids
on the compressor.
- Do not place inflammable objects near the
compressors.
- During down-times, turn the pressure switch
to position "0" (OFF)
- Never aim the air jet at people or animals (fig.
34)
- Do not transport the compressor while the
tank is pressurized.
-
Be careful with regard to some parts of
the compressor such as the hard and
delivery tubes, as they can reach high
temperatures. Do not touch these parts
to avoid burns. (fig. 18-19).
- Transport the compressor, lifting or pulling it
with the appropriate grips or handles (fig. 4-6)
- Keep children and animals well away from the
machine operating area.
- If using the compressor for painting:
a) Do not work in closed environments or near
to naked flames.
b) Make sure there is adequate exchange of air
at the place of work.
c) Protect your nose and mouth with an
appropriate mask. (fig. 35)
- If the electrical cable or plug is damaged, do
not use the compressor and contact an
authorized service center to replace the faulty
element with an original spare part.
- If the compressor is located on a shelf or on a
top above floor height, it must be secured to
prevent it falling while in operations.
- Do not put objects or your hands inside the
protective grilles to avoid injury to yourself or
damaging the compressor. (fig. 36)
- Do not use the compressor as a blunt object
toward things or animals, to avoid serious
damage.
-
When
you
have
compressor, always remove the plug from the
power socket.
finished
using
the
NOTE:
For
the
compressor tanks are manufactured to meet
Directive CE87/404
Acoustic pressure measured free-field at a
distance of 1m: <dB(A) at maximum
operating pressure.
HINTS FOR EFFICIENT OPERATION
- For efficient operation of the machine at full
continuing load and at maximum operating
pressure, make sure the temperature of the
work environment indoors does not exceed
+25 C. We advise you to use the compressor
at 70% maximum duty per hour at full load as
this ensures efficient operation of the product
long-term.
STORING THE PACKED AND UNPACKED
COMPRESSOR
For the whole time that the compressor is not
used before unpacking it, store it in a dry place
at a temperature between +5ºC and +45ºC and
sheltered away from weather.
For the whole time that the compressor is not
used after unpacking it, while waiting to start it
up or due to production stoppages, place
sheets over it to protect it from dust, which may
settle on the components. The oil is to be
replaced and the operational efficiency of the
compressor is to be checked if it is not used for
long periods.
PNEUMATIC CONNECTIONS
Make sure you always use pneumatic tubes for
compressed
air
characteristics
that
compressor. Do not attempt to repair tubes if
faulty.
European
market,
with
maximum
pressure
are
adequate
for
the
the
Publicidad
