Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
3. Remove the filter, as illustrated, then rinse it out and lightly tap on the
edge of the filter to remove dust and debris.
Note: Do not attempt to clean the filter with a brush or finger.
4. Place the dust compartment and filter aside to dry before reinstallation.
Note: Filter must be fully dry before use (allow at least 24 hours).
Mop Pad
* After-each-use cleaning is recommended.
1. Pull the mop pad off of the mopping assembly to remove it.
2. Clean and dry the mop pad.
Remove the pad from the mopping assembly before cleaning it, and
make sure dirty water does not flow back into the water outlet to avoid
clogging. Do not press too hard on the mop pad, as this can hinder its
performance. The mop pad should be cleaned before each use.
Note: It is recommended to change the mop pad every 3 to 6 months.
18
Publicidad
