Descargar Imprimir esta página

Segway Gokart Pro BUMBLEBEE Limited Edition Manual Del Usuario página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Tire Replacement
* Tires are subject to wear and need to be purchased separately.
Remove the six screws from the tire.
1
Replace the rear tire or comfortable tire, cover the hubcaps, and tighten the six screws.
3
* The steps above are only applicable to the replacement of rear tires.
The comfortable tire is only for S-Max.
26
Remove the hubcaps and then remove the
2
outer tire.
The side with printing should face outwards.
5 Charging
1.
Lift up the
cover
Your S-Max is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge).
WARNING
ONLY use the original charger, otherwise the battery will be damaged and there is a risk of fire. DO NOT use
wet or damaged batteries. DO NOT charge when the charge port or cable is wet.
Charge port
2.
Open the
3.
Insert the plug into the socket
rubber cap
* Charging the wrong way can cause vehicle
damage.
27

Publicidad

loading

Productos relacionados para Segway Gokart Pro BUMBLEBEE Limited Edition

Este manual también es adecuado para:

Gokart pro optimus prime limited editionNinebot s-max