Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the Speaker
Press the disassembly switch while lifting the speaker upward.
* For more information about the speaker, see the user manual of Ninebot Engine Speaker.
Disassembly and Replacement of Tires
* Only applicable to Gokart front tire.
1
Use a 19 mm wrench to remove
the middle screw.
12
2
Replace the tire.
3
Tighten the screw.
The cross head of the screw should face outwards.
5 Charging
1
Disconnect the electrical connection cable of the
Gokart from the power extension cord.
Gokart cannot charge if its temperature exceeds 104°F (40℃). Please wait for the temperature to drop
before charging.
ONLY use the original charger, otherwise the battery will be damaged and there is a risk of fire. Do not use
wet or damaged batteries. Do not charge when the charge port or cable is wet.
6 Before the First Drive
For your safety, a new Gokart is inactivated.
before first use.
Scan the QR code to download the App (Bluetooth 4.1 or above).
Segway-Ninebot App
The Gokart has four modes: ECO, STRADA, SPORT, and CORSA mode. After the Gokart is activated, the
mode can be switched via the App.
2
Charge the Gokart by plugging the S-Max
power cord into the power extension cord.
Please activate your Gokart via the App
13
Publicidad
