Publicidad
Idiomas disponibles
Idiomas disponibles
Installation - Electrical/Electronic Components
Please refer to manual supplied with electronics for wiring installation, operation instructions
and troubleshooting.
Alternatively, for Smart Electonics visit www.purpleline.co.uk/qtr-m005
or for Basic Electronics visit www.purpleline.co.uk/qtr-m003
Operation and Maintenance
It is possible to position the caravan's hitch exactly over a stationery car's tow ball using the
mover. But please be very careful!
Hitch the caravan in the normal way ready for towing.
Release the rollers from the caravan's tyres. You cannot tow the caravan with the Mover
engaged! Make sure that both rollers are fully disengaged!
Trying to drive away with the mover still engaged, will damage the mover, your caravan tyres
and strain your tow vehicle!
To prevent the battery from becoming totally discharged during long periods of inactivity it must be
disconnected and recharged before using again.
Please check regularly that the rollers of the drive units are free of any dirt, or debris that may have
been picked up from the road. Any further maintenance is not required.
Please check regularly the distance between the rollers and the tyres. In the neutral (fully disengaged)
position this must be 20mm.
When your caravan is stored for an extended period of time (over winter for example) it is
recommended to remove the leisure battery from the caravan. Make sure you keep it charged to
ensure it is in good condition the next time you want to use it.
Once a year have your caravan mover maintained and visually inspected. This inspection must include
all the bolt/nut connections, the cables and electrical connections and lubrication of movable parts/
joints.
In case of any failures or problems, please contact your Caravan Mover supplier.
18 EN
Publicidad
