Yeyian SIGURD 3501 Manual De Instrucciones página 10

OPERATION
Function Keys
A. AUTO/SELECT KEY
When with only VGA mode: without OSD menu, this key is used to auto-adjust, to
adjust the geometrical setting to the best condition. Under OSD menu, this key is
used as confirmation. Under VGA+DVI mode, this key is used to switch the signal
between VGA and DVI.
B. +/- or >/< KEY
In the OSD menu, these two keys are used to scan and select the menu on the left
or right and the volume setting. If the monitor does not have any audio signal press
-/<, this can be used as a shortcut key for brightness; if the monitor does not have
any audio signal function press +/- or >/<, this is only used for adjusting the volume.
C. MENU KEY
Menu Key is use to enter into menu and exit from menu.
OSD
Main Menu Item Submenu Item Discription
Brightness Adjusts Monitor Brightness
Contrast Adjusts Monitor Contrast
Luminance
LED Mode Selects the LED Mode
Adjusts Laser Logo Light, ON
Logo Light
or OFF.