Insert one end of the DVI cable into the monitor' s input connector, and the other
end to the video
output of your computer (either dedicated or integrated video card).
Audio Output
You can connect headphones or speakers directly to the audio output of the
monitor through an audio cable with 3.5mm connectors.
Power Cord Connection
First, insert one end of power cord cable into the power input jack of the monitor,
and another end into the power outlet.
Power On
Turn on the monitor and computer, the indicator will light green ( or blue ) when the
screen is under normal condition. Please check to see if there is any wrong with
the connection of video signal cable if the indicator lights red.
Self-Inspection
If the monitor inspects that there is no horizontal and vertical signal, it will prompt
to check the video input,please refer to the illustration below, and the monitor will
enter into power saving mode after several seconds,the indicator will light red. The
screen will restore to normal display once receiving video signal.
Image Adjustment
Please adjust the image according to your need; please refer to the "Operation" in
Section Three.