Husqvarna AUTOMOWER 415X Manual De Instrucciones página 5

INSTALLATION
Note: All pictures shown are for illustration purposes only. Actual product appearance may differ
due to variations among models.
Preparing the door
A separate kit is needed to install the Husqvarna Automower® Fence Door. Refer to the installation
instructions provided with the door kit.
Removing the body
a
CAUTION: Pull the connectors. Do not pull the cables.
1. Clean dirt and grass from the product before you remove the parts.
2. Push the ON/OFF button for 3 seconds and make sure the product is switched off.
3. Gently pull the top cover at the rear, the middle and the front to remove it.
4. Clean the area around the grommets.
5. Pull out the rubber grommet and remove the charge cable and the headlight cable.
6. Find the 4 positions where the body is attached.
415X
5