Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
If the LockerLock is now activated by pressing the pushbutton, the LED on the inside
flashes alternately in red and green. This is the request to change the battery as
soon as possible.
NOTE
Malfunction due to low battery charge!
Problem-free operation is only ensured if adequately charged
batteries are used.
> Replace weak batteries immediately as soon as the
signal occurs!
> Always use new AA batteries (1.5 V; recommended item
910.54.980).
> Always replace all four batteries.
The locking authorisations for the user keys are retained after a battery change and
do not have to be reset.
For step by step instructions "Battery change", see
illustrations starting on page 38.
AA
NOTE
> Do not dispose of old batteries in household waste!
> Dispose of batteries in an environmentally friendly way, e.g.
using a municipal collection point.
13
Publicidad
Tabla de contenido
