Lindy 38344 Manual De Usuario página 10

User Manual English
To forward the USB signal from receiver to transmitter, set the switch HOST/DEVICE USB on the
transmitter to the right side (DEVICE USB), and set the switch HOST/DEVICE USB on the receiver to the
left side (HOST mode).
Audio Embedding and De-Embedding
The transmitter supports audio embedding and de-embedding on the 3.5mm IN/OUT audio port.
When the 3.5mm IN/OUT switch is set to left, the audio signal from an external audio device will be
embedded to the 3.5mm IN/OUT port.
When the 3.5mm IN/OUT switch is set to right, the 3.5mm IN/OUT port will output the audio signal de-
embedded from the HDMI IN port.