Husqvarna P 524X Manual De Usuario página 33

9. Remove the 4 screws and remove the belt guard.
10. Remove the belt from the pulley, lift the belt holder
(A) and remove the belt from the tension wheel.
11. Remove the belt from the pulley on the tool frame.
12. Remove the belt guard below the engine pulley.
1902 - 003 - 09.02.2023
A
13. Remove the belt guard in front of the rear
transmission.
14. Remove the belt from the engine pulley.
15. Remove the belt guard on the right side of the
product.
16. Remove the belt from the rear engine pulley.
33