Audizio ADRIA Manual De Instrucciones página 10

19. OK
Press to confirm input
20. Menu
Press to enter the menu
21. Num pad
Numeric keys for accurate input
22. Mute
Press to (un)mute the device
23. Preset/Memory
Press to enter the preset/memory list
The common controls for audio playback are identical across all playback modes:
Rotate [Volume/OK] to increase or decrease the volume level. The general track controls are [Play/Pause] to start and pause
tracks and the [Next] and [Previous] buttons to skip to the next or previous track in the current playlist.
The main control for moving through menus and options is [Volume/OK]. Rotate the knob to move up or down a menu. Once
the required option or value is highlighted press the knob to confirm and enter the highlighted sub-menu. All menus and lists
act as loops, meaning that turning the control to go beyond the first or last entry in a menu or list takes you to the opposite
end of the menu or list. To enter the menu tree in a particular mode press [Menu/Info]. To move back a menu level press
[Back]. Each mode has a unique menu structure, with options specific to that mode.
Ensure that the WIFI- and DAB/FM antenna are screwed and tightened onto the unit correctly. Turn on the radio by pressing
[Power].
When turned on for the first time, the device starts a setup wizard to configure settings for date/time
and network automatically. Once this setup has finished, the system is ready to use in most modes.
Note: To change these settings later, enter Menu>System settings> and select the required setting.
To run the setup wizard again, select Menu>System settings>Setup wizard.
The Network settings can be reset by manually running the Network wizard, select Menu>System
settings>Network >Network wizard. Choose [Yes] to start the setup wizard. When [No] is chosen, the device asks if you
would like to run the wizard next time, select [Yes] or [No]. The system then starts without configuring time/date and network
settings and enters the main menu.
Note: If the power supply is interrupted while the wizard is in progress, the wizard will run again next time.
To connect the device with your network, you need a Wi-Fi wireless router (and corresponding password key, if set).
Password protected network
To enter a network password key, rotate [Volume/OK] to highlight the desired character and press
[Volume/OK] to confirm the selected character.
"Backspace", "OK" and "Cancel" are located on the right side of the password screen. These can be
accessed with rotating [Volume/OK], by pressing [Menu/Info] the selection (un)highlights the Back
Space option.
If connecting fails, the device returns to a previous screen automatically. To exit the process use the
[Back]- or [Menu] button.
Note: The device remembers the last four wireless networks it has connected to and automatically tries
to connect to whichever one it can find. You can access the list with registered networks through Menu>System
settings>Network>Network profile> from here you can delete unwanted networks by rotating and pressing [Volume/OK],
then confirm delete: [Yes].
There are also other options for viewing and manually altering network settings: Menu>System settings>Network.
Users experienced with networking may find these options useful for diagnosing and fixing network problems.
Before transmission between your BT device and the radio is possible, both devices must be coupled. This process is called
"pairing". The radio is served as a receiver, to receive the music stream to be played on the radio. If you have already coupled
to a BT device before, this connection will be restored automatically when both devices are in range and BT operation has
been selected on the radio. "Pairing" does not have to be repeated. This function may need to be activated in your BT device,
however.
• Press [Mode] to enter BT mode.
• Turn on BT streaming on your device. The device will scan for pairable BT devices in the reception range.
• Select "Audizio Adria" from the list with found devices.
Start playback on your BT device. Playback now takes place emitting sound from the radio (connected loudspeakers).
10