Audizio ADRIA Manual De Instrucciones página 8

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging. If the device has been
exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising
condensation water might damage your device. Leave the device switched off until it has reached room temperature.
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the
mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The
unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
Please ensure the following is ready: You have a broadband internet connection. A wireless broadband router is connected to
the internet successfully. The radio supports Wireless B, G and N connection (Wireless N router can also be used with the
setting on B or G). You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption
code/password. You need to key in the correct code when the radio is connected to the wireless router for network
connection. If you do not know the code/password, please contact the person/technician who set up the router/network for
you. The radio can work via Wireless network connection (Wi-Fi connection).
• Remove internet radio from the package box.
• Plug in the power lead and switch on the device.
Note: Before starting, please make sure that the voltage mentioned on the power supply is corresponds to the voltage used in
your local area. Only use the supplied mains VDE plug to connect the device to a household mains socket.
1. Power
Press to switch the device in on-/standby mode
2. USB slot
To play media files from a USB device
3. Infrared remote control sensor
4. Mode
Press to switch between different modes (Internet radio, podcasts, MP3, DAB, FM, BT)
5. Previous
Press to change to previous track
6. Play/Pause
Press to start/resume or pause playback
7. Next
Press to change to next track
8. Display screen
9. Alarm
Press to initiate alarm setting
10. Preset/Memory
Press to access the memory menu (for storing presets)
11. Menu/Info
Press to see station information/properties of the station that is playing. Press and hold to enter the menu that
corresponds to the currently used mode
8