FUXTEC FX-4MS131 Manual De Instrucciones Original página 52

Cooling fins Exam
connecting Check
elements such (tighten if
as screws and necessary)
nuts
Coupling Exam
Check and
Idle speed
adjust
Valve Check and
clearance adjust
combustion
Clean up
chamber
Fuel Check
Fuel tank Check
Fuel line Check
WARNING
A. Increase maintenance intervals if working in dusty environments.
B. All maintenance work - except for the work listed in the operating instructions -
must be carried out by qualified maintenance personnel
C. For commercial use, maintenance cycles must be adjusted as required.
Oil change
It is also recommended to replace the oil if it runs hot and loses
its lubricating properties.
1 After filling, check that the oil cover is well closed.
2 When changing the oil, unscrew the oil cover and tilt the engine towards the oil filler neck
to collect the oil in a suitable container for used oil.
3 Fill-in sufficient new 4-stroke oil.
4 Screw the oil cover back in.
In case of spillage, please wipe off the overflowing oil and do not forget
to wash your hands well with soap.
WARNING
Please contact your local community for the disposal of the used oil. Please do not dispose
of used oil in the sewage system or the open environment.
Maintenance
Air Filter
The function of the air filter is to clean impurities like dust from the air and to prevent
these dust particles from entering the combustion chamber and the carburettor.
Original Bedienungsanleitung FX-4MS131_de_en_fr_ita_es_rev05
After 300 h
Every x years (replace if necessary)
52
■
■b
■b
■b
■
■