FUXTEC FX-4MS131 Manual De Instrucciones Original página 55

Original Bedienungsanleitung FX-4MS131_de_en_fr_ita_es_rev05
4. After fuel is drained, start the machine.
5. Let the device idle until the machine stops by itself. That cleans the carburetor of fuel.
6. Let the machine cool down (about 5 minutes).
7. Use a spark plug wrench, remove the spark plug.
8. Pour one teaspoon of clean 2-cycle oil into the combustion chamber. Pull the starter cord
slowly several times to coat the internal components. Replace the spark plug.
9. Store the machine in a cool, dry place away from any ignition source such as
an oil burner, water heater, etc.
TRANSPORT PROTECTION
Make sure that the machine is well visible during transport to avoid fuel loss, damage, or injury.
Use transport protection for metal sheets during transport and storage.
55