Crux ARTISAN Serie Manual De Instrucciones página 11

Excessive noise or vibrations
occur after juice extractor is
turned on.
The blade basket is blocked.
Food Is jammed in the
base of the feed tube; the
juice extractor has stopped
during juicing.
"E" Error on the LCD screen
"L" on the LCD screen
• Check to make sure the blade basket is properly seated.
• Pulp may have built up on the blade basket. Clean the
blade basket.
• Try alternating different types of produce while juicing.
Note: Because of the juice extractor's powerful motor, a
small amount of noise and/or vibration is normal when the
extractor is turned on and as it comes to a complete stop.
All juicers will sound slightly different.
• Turn the speed selector dial to Power (OFF). Remove
cover and clear feed tube. Chop fruits and vegetables into
smaller pieces to facilitate juicing.
• There was an error when turning on the juice extractor.
• This product is equipped with a Manual Resettable
Thermal Protector to protect the motor. If the motor shuts
down and LCD shows "E" and "1" flashing alternatively, turn
the Speed Selector Knob to Off position, and then unplug
the juice extractor. Let the unit rest for approximately
half an hour. Once the resetting period has elapsed, plug
the power cord back into the outlet and turn the Speed
Selector Knob to the desired setting to continue.
• The locking bar is not securely locked into place.
• The LCD will display "L" when the locking bar is down for
safety measures to ensure that the locking bar is always
properly secured and locked in place prior to juicing.
9