Descargar Imprimir esta página

Husqvarna P4A 18-C70 Instrucciones De Empleo página 8

Ocultar thumbs Ver también para P4A 18-C70:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
English
8 |
The charging process is
only possible when the
temperature of the
battery is within the permitted
charging temperature range
(0–45 °C).
Thanks to the intelligent charging
process, the state of charge
of the battery is automatically
detected and then charged up
with the optimal charge current
depending on battery temperatu-
re and voltage.
In this way, the battery is treated
with care and remains perman-
ently fully charged when it is
stored in the battery charger.
A significantly reduced operating
time after charging indicates
that the battery has deteriorated
and must be replaced.
When the charger is used con-
tinuously, or for several conse-
cutive charge cycles without
interruption, the charger may heat
up. This is, however, harmless and
does not indicate that the charger
has a technical defect.
Charging times
The following table displays the
approximate time required in
minutes in order to reach the re-
quired state of charge, depending
on the battery type. The charging
time depends on the battery type
and the temperature.
P4A 18-C70
Rechargeable
18V POWER
FOR ALL system
batteries
1,5 Ah
2,0 Ah
2,5 Ah
3,0 Ah
4,0 Ah
4,0 Ah Power
Plus
5,0 Ah
6,0 Ah
corresponds to a state of charge of
≈ 80%
corresponds to a full state of
charge
≈24
≈33
≈32
≈45
≈40
≈60
≈48
≈72
≈64
≈95
≈69
≈88
≈80 ≈105
≈96 ≈130

Publicidad

loading