Publicidad
PRODUCT DESCRIPTION / PRODUKTSBESCHREIBUNG / DESCRIPTION DU PRODUIT /
DESCRIPCIÓN DEL PRODUCTO / DESCRIZIONE DEL PRODOTTO
1. TWS pairing button: Long press for 2 seconds to enter TWS pairing state, long press
EN
for 2 seconds again to cancel TWS pairing state. After TWS is paired, it will be memorized
and automatically paired next time when it is switched on. Quickly double-click to enter the
Bluetooth mandatory pairing state.
2. Light modes switch button: Short press can realize the switch of the three modes of long
light, rhythm and off; the power-on default is warm white and constant light, short press is
the rhythm mode.
3. Volume Down / Previous Song: Long press " - " to reduce volume; Short press " - " to
switch back to the previous song.
4. Volume UP / Next Song: Long press " + " to increase volume. Short press " + " to move
to the next song.
5. Power on/off/play/pause button: Long press for 2 seconds to turn on the device and they
will automatically enter the Bluetooth pairing state; long press for 2 seconds again to power
off. Short press for play and pause.
6. Indicator light: The blue light flashes quickly during Bluetooth pairing, and it stays on after
pairing is successful. When playing music the blue light will flash slowly, and it stays on
when the AUX IN state is on. The red light will stay on when charging, and goes off when
it is fully charged.
7. Audio jack
1.TWS-Koppelung-Taste: Drücken Sie die Taste für 2 Sekunden lang, um den TWS-Pairing-
DE
Status aufzurufen, und drücken Sie dann 2 Sekunden lang, um den TWS-Pairing-Status
abzubrechen. Nach dem Pairing des TWS wird dieser gespeichert.
Beim nächsten Einschalten automatisch koppeln; Doppelklicken Sie schnell, um den
obligatorischen Bluetooth-Kopplungsstatus aufzurufen.
2. Lichtmodus-Umschalttaste: Durch kurzes Drücken wird zwischen den drei Modi
umgeschaltet: Das Licht ist an, Rhythmus und aus; die Standardeinstellung beim
7 8
8. USB jack
9. LED warm white light
9
3
5
1
2
182mm/7.16in
6
4
Publicidad
