Imit SILVER CR S Manual Del Usuario página 18

You may press the "Mode" button to switch to the other modes.
MANUAL MODE
In order to change the manual mode temperature, press the "Up" or "Down" button
while in the main screen. The Room Thermostat will switch to Manual Mode once
pressed the "Up" or "Down" button.
You may press the "Mode" button to switch to the other modes.
WEEKLY PROGRAM
You may set the operating schedule of your Room Thermostat with weekly program
mode. 7 different temperature values can be set for each day in weekly programming.
These values can be set in temperature adjustment screens '' P0-P6''.
In order to set the weekly schedule, press and hold the "Weekly Program" button for 3
seconds while your Room Thermostat is on. The "Hour, Minute and Day" setting will
appear. Press the "Heating & Cooling Option" button until the "Weekly Program" menu
(P0) appears.
Days of the week will be blinking on the screen. You can initiate the weekly program
setting if you wish to set the same schedule for every day of the week.
Press the "Up" button once if you wish to set the same schedule for the weekdays. First
five days of week will be blinking on the screen.
Press the "Up" button once more if you wish to set the same schedule only for the
weekend. Last two days of the week will be blinking on the screen.
Press the "Up" button one more time if you wish to set the same schedule for every day
of the week. 1st day of the week will be blinking on the screen. You can switch between
the days by pressing the "Up" button. Press the "Down" button in order to switch to the
previous day.
Press the "Weekly Program" button once to set a schedule.
"P0" will be blinking on the screen. Set the temperature value of "P0" by pressing the
"Weekly Program" button once more. The hour setting of "P0" cannot be changed since
it's factory setting.
Press the "Weekly Program" button again. Day indicator will be blinking. If you will not
change the day, press the "Weekly Program" button again and switch to the "P1" setting
by pressing the "Up" button.
First, hour setting will appear on the screen. Once you complete the hour setting, adjust
the minute setting by pressing the "Weekly Program" button. After the minute setting,
press the "Weekly Program" button to set the temperature value.
Follow the same steps for other schedule settings.
Once all changes made, press and hold the "Weekly Program" button for 3 seconds to
save.