azurano Magic Remote
6
EN
USING
1. How to register (pair) or deregister (unpair)
2. How to use
How to register (pair) the Magic Remote
To use the Magic Remote, first pair it with your TV.
1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the
(OK) on the remote control.
- If the TV fails to register the Magic Remote, try again after
turning the TV off and back on.
How to deregister (unpair) the Magic Remote
Press and hold the
time for five seconds, to unpair the Magic Remote with your TV.
Press and hold
disconnect and re-register the Magic Remote at the same time.
Shake the Magic Remote slightly to the right and left or press
or
(INPUT)
(Q. Settings)
screen.
(In some TV models, the pointer will appear when you turn the
button.)
If the pointer has not been used for a certain period of time or Magic Remote is
placed on a flat surface, then the pointer will disappear.
If the pointer is not responding smoothly, you can reset the pointer by moving it
ot the edge of the screen.
The Magic Remote depletes batteries faster than a normal remote due to the
additional feautures.
and
buttons at the same
button for more than 5 seconds to
buttons to make the pointer appear on the
Wheel
,,
Wheel (OK)