Publicidad
Idiomas disponibles
Idiomas disponibles
10 Delay Start
11 START
Indicators
Control Lock indicator
Self Clean indicator
Rinse Refill indicator
Smart Control
DW7000B_DW80B7070_AA_DD68-00243A-01_EN_FULL.indd 31
Delay a cycle for up to 24 hours in one-hour increments.
To increase the delay start time, press or hold the Delay Start
button. The hour displayed indicates the time at which the
wash will start.
-
After setting the delay time, press the START button, and
then close the door to start the cycle.
-
To change the delay time after the dishwasher has started,
first turn the dishwasher off and turn it back on. Then,
select a new cycle and change the delay time settings.
To start a cycle, press the START button before closing the
door.
Cancel & Drain: To cancel a currently running cycle and drain
the dishwasher, press and hold the START button for three (3)
seconds.
Once the dishwasher is reset, select a cycle and option, and
then press START to restart the dishwasher.
Lights up if Control Lock is activated, and blinks if
any button except for the POWER button is pressed.
Lights up if Self Clean is activated, and blinks for
5 seconds every 20-22 cycles. The cycle counter
disappears when the Self Clean cycle is complete,
or the dishwasher reaches the 23rd cycle.
Lights up if the dishwasher runs out of rinse aid.
Lights up if SmartThings is activated.
English
31
2023-02-24
3:45:50
Publicidad
