Wall or Ceiling Fixing
Make sure that the wall or ceiling chosen for placing the device is suitable for
supporting the weight indicated in the technical data sheet.
Place the device as shown in the photo, at a minimum distance of 15 cm from the
ceiling.
Use four 10 mm wall plugs (Fischers) suitable for the wall on which the device is going
to be installed.
DO NOT ROTATE THE DEVICE
For wall installation
In case of ceiling installation, it is NECESSARY to equip the device with the SP2
accessory.
In the case of "Floating" installation (away from the ceiling), use 10 mm threaded bars
in galvanized steel instead of wall plugs and lock the bracket between nut and locknut.