Black and Decker BDFH44M Manual De Instrucciones página 13

CLEANING AND CARE
Cleaning the Lint Filter
WARNING
Do not operate your dryer without the lint filter in place.
Do not use a damaged or broken lint filter. This may reduce performance and/or cause
fire.
To prevent a risk of fire, make sure to clean the lint filter after every load.
Lint filter
Empty the Water Tank
Water tank
1. Pull out the water tank using both hands to avoid spilling water.
2. Empty the water.
3. Reinsert the water tank.
WARNING
The water tank needs to be emptied after each use.
Do not operate the dryer without the water tank in place.
WARNING
To avoid overflow, the dryer cycle will pause when the water tank is at capacity.
The symbol will illuminate.
Once the water tank is emptied press Start/Pause to resume the cycle.
Pull out the lint filter. Remove
the lint. Reinstall the filter.
Page 13